|Pretreatment part||Feed pump||CNP CDL8-40||1.5KW|
|Sand filter||Φ750×1800 (filter 800kg)||SS304/FRP|
|Active Carbon filter||Φ750×1800 (filter 250kg)||SS304/FRP|
|Micron filter||dia 330 x 500mm x 1.5mm (40" X 5 micron filter)||SS304|
|RO Part||High pressure pump||CNP CDL8-180||7.5kw|
|RO membrane||FILMTEC BW30-400 x 4pcs|
|Membrane vessel||8"x 2m FRP VESSEL 2 SETS|
|Piping and controlling valve||Piping and valves||U-PVC piping & Valves|
|Control system & Indicator||PLC system, Water level control, Pump protecting ,Automatic electric valve control||LS PLC Control System|
|Other fittings of machine||Pressure gage||1.0MPa,2.5Mpa. 5pcs in total|
|Conductivity of the table||CM230 X 2sets|
|Main frame||Stainless steel 1set|
|Pipeline flow meter||35GMP 2sets|
Water reverse osmosis unit can remove most of inorganic salts, particles, bacteria, viruses, heavy metals, and other soluble substances. The rejection rate can reach 98%.It is simple, low energy consumption, non-pollution, etc, so, it is widely used for producing pure water.
Raw water contains many impurities, such as suspended solids, colloidal, organic and inorganic. To ensure Reverse Osmosis Desalination System at normal operation, the suspended solids, colloids, organic matters must be removed in advance, so that feed water to reverse osmosis system meets the requirement. So, the pretreatment part should be equipped. The pretreatment part includes: Mechanical Filter, Activated Carbon Filter and Security Filter.